Microjig MATCHFIT Ratchet Dovetail Clamp AP (DVC-700RAP)

UPC:

815267011771

MPN:

DVC-700RAP

Availability:

Usually Ships in 1-2 Business Days - Subject to Change

Description

Description

Microjig MATCHFIT Ratchet Dovetail Clamp AP (DVC-700RAP)

A ratchet clamp that defies gravity.

Most clamp arms are free to fall down when released forcing you to reset them every time you secure them, but not Microjig’s Ratchet Clamp. Our exclusive “Anti-Pivot” AP Spring holds the arm where you set it. Now you can release the pressure, move your stock, and reclamp without needing to adjust the arm, upside down or right side up.

The ratchet mechanism is fast acting; just adjust the arm so the pad in on the stock and pull the handle to set the hold. Every click increases the pressure. Then instantly open the clamp by pressing the release button.

The long ratchet handle provides superior leverage making them easy to use for everyone even those with hand grip issues. The positive lock of the ratchet mechanism resists loosening even under heavy vibration such as grinding or routing.

Work faster with a clamp arm that won't drop.

Create your own clamp tracks anywhere you can route a dovetail groove. Enjoy the same, limitless functionality as the standard Dovetail Clamps with three added benefits:

‍Anti-Pivot technology keeps the clamp arm in place to make repetitive tasks faster.
Included X-PAD™ applies force in two directions and helps you secure material with fewer clamps.
Increased clamping range (to 8.5").

Work faster with a clamp arm that won't drop.

The Anti-Pivot Coil Spring prevents the clamp arm from pivoting and dropping when switching workpieces in repetitive processes. Save time and work faster without having to reset your clamp height for every part.
Use any standard 1/2"–14º dovetail router bit to route your own tracks virtually anywhere. Clamp without limits, and never buy expensive T-track again.

Clamp in two directions with a single clamp.

The included X-PAD™ simultaneously applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.
The V-groove profile gives you two points of contact to clamp round or oblong stock with ease.

Build jigs like never before.

The MATCHFIT dovetail track system allows you to create your own tracks with just a router bit. It’s like an infinite supply of T-track without the cost of T-track.

Create your own clamp tracks anywhere you can route.

Simply route a groove anywhere you need using a 1/2”–14º dovetail router bit.

Always ready to use.

Microjig’s Anti-Pivot AP Spring “pre-loads” the clamp arm preventing it from falling when released. Clamp and release over and over without resetting the arm.”

Efficient ratchet mechanism.

Set the arm and draw the handle to tighten, press the release button to move quickly to the next task.

The features you expect.

This Ratchet Clamp works in the standard MatchFit Dovetail Grooves you mill and the large clamping face is equipped with a molded pad to protect your work.

View AllClose