Tormek T-8 Ultimate Plus Kit (TBP815)

MPN:

TBP815

Condition:

New

Availability:

Usually Ships in 7-10 Business Days - Subject to Change

Description
Warranty Information

Description

Tormek T-8 Ultimate Plus Kit (TBP815)

Tormek T-8 Sharpening System

The Tormek T-8 sharpening machine maximizes the precision with its revolutionary fully cast housing. This new design, together with a number of elaborated details, gives you the best conditions possible for a successful sharpening with top results.

The advanced design ensures an unbeatable precision for the Universal Support, which is the foundation of the Tormek sharpening system, since it controls all grinding jigs anmdf accessories. The former mounted sleeves for the Universal Support are now integrated in this model's fully cast machine housing. This update will increase the accuracy in your sharpening.

The characteristic drive system of Tormek is also implemented in the new model. the efficient system manages to maintain a constant speed, even under full load - something unique for Tormek's sharpeners. Tormek Original Grindstone SG-250 sharpens all qualities of steel, including HSS. The powerful AC motor is designed to drive the full grindstone during continuous use.

The water trough has been further improved with a screw lift for an easier fitting. It also has a double function magnetic scraper; during sharpening the magnet collects steel particles and after sharpening the scraper will make it easy to clean the water trough. For long tools that may drip water outside the water trough, you can easily fit the included water chute onto the edge of the trough.

The stainless steel main shaft with Tormek's unique EzyLock nut will automatically set the stone to the right torque without tools. EzyLock also makes it easy to switch stones if you work with Tormek's special stones SB-250 or SJ-250.

Includes:

TT-50 Truing Tool
PA-70 Honing Compound
WM-200 Angle Master
SP-650 Stone Grader
HB-10 Handbook
SE-77 Square Edge Jig

Specs:

Patent: SE 538962, SE 538642, EP 2946881, EU Reg. No 002984088-0001, CN Reg. No 201630384930.1, Patent Pending SE, EP, US
Dimensions: Width 270 mm (10 5/8"), Depth 270 mm (10 5/8"), Height 330 mm (13")
Weight: Shipping weight 18.2 kg (40.1 lbs), Machine only 14.8 kg (32.1 lbs)
Grindstone: Tormek Original Grindstone, Aluminium oxide, ∅250×50 mm (10"×2") 90 rpm, torque 14.7 Nm
Leather Honing Wheel: ∅ 220×31 mm (8 5/8"×1¼")
Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
Housing: Zinc cast top and frame. Sides in ABS plastic.
Motor: Industrial single phase, 200 W (input) 230 V, 50 Hz or 115 V, 60 Hz. Continuous duty, Maintenance free. Silent running, 54 dB. 25,000 hour life
Warranty: 7 years*

Tormek Woodturner's Kit TNT-808

This kit contains everything you need to shape and sharpen all your turning tools, including two patented jigs (works like three!), a radiused leather honing wheel, a serious instruction and the appreciated Turning Tool Setter.

The jigs are packed in a tray, which works as a storage center. The tray can either be screwed to your wall or be used as a drawer liner.

For the jigs and accessories included, see below.

Includes:

Woodturner's Instruction Box TNT-300
Turning Tool Setter TTS-100
Machine Cover MH-380
Profiled Leather Honing Wheel LA-120
Gouge Jig SVD-186
Multi Jig SVS-50
Tool Rest SVD-110
Tormek Case TC-800
Tormek Tray for Woodturners Kit TNT-00

Tormek NEW Hand Tool Kit HTK-806

Includes all the jigs you need for sharpening your knives, scissors, draw knives and axes as well as short chisel and carving tools.

The jigs are packed in a tray, which works as a storage center. The tray can either be screwed to your wall or be used as a drawer liner.

For the jigs included, see below.

The HTK-806 Hand Tool Kit is a combination of several Tormek products.

TC-800 Tormek Case
HTK-00 Storage Tray for Hand Tool Kit
KJ-45 Centering Knife Jig
KJ-140 Wide Centering Knife Jig
SVM-00 Small Knife Holder
SVX-150 Scissors Jig
SVA-170 Axe Jig
SVS-38 Short Tool Jig

Tormek Planer Blade Attachment (SVH-320)

The Tormek SVH-320 Planer Blade Attachment allows you to sharpen HSS planer blades of any length. Also suitable for miter trimmer blades. Accurate setting ensures precise sharpening along the entire edge.

Why SVH-320 Planer Blade Attachment?

Sharpen planer blades of any length.
Patented design with precise adjustment for identical results on your blades.
Works with both Tormek T-4 and Tormek T-8, as well as older models, but Tormek T-8 is recommended.

Sharpen your own blades - save time

The SVH-320 Planer Blade Attachment always lets you work with sharp planer blades. You also avoid being interrupted in your work, having to send away blades for sharpening. The jig can sharpen blades of unlimited length. Blades longer than 270 mm (10 5/8") are moved along in the jig and sharpened in two steps.

Always top precision

The SVH-320 Planer Blade Attachment guides your tools precisely and sharpens them straight along their entire length to the sharpening depth you set. This leaves minimal scope for handling errors when the jig is set up correctly. Follow the instructions carefully, step by step, for perfect sharpening of your planer blades.

Specs

Weight: 1.80 kg (3.97 lb)
Color: Gray/black
Material: Aluminum, stainless steel, black composite
Warranty: 2-year warranty

Tormek Drill Bit Sharpening Attachment (DBS-22)

The DBS-22 Drill Bit Sharpening Attachment allows you to sharpen your drill bits from 3 mm (1/8") to 22 mm (7/8") in diameter with maximum precision and to give a four-facet point for best performance. The optimum tip and lip relief angle can be set for each drilling operation, taking into account the drill bit size and material. You can also sharpen broken bits back to the perfect shape.

Why DBS-22 Drill Bit Sharpening Attachment?

Sharpens a four-facet point that drills more efficiently and lasts longer.
Sharpens drill bits with outstanding precision.
Extends drill bit service life more than four times over compared to traditional S-tip drill bits.
Works best with Tormek T-8, as well as older models.

Four-facet point that lasts longer

The patented DBS-22 Drill Bit Sharpening Attachment is used to create a four-facet point that provides great cutting characteristics as the cross-cut of the drill bit is pointed instead of being almost flat, as on many other drill bits. A four-facet point won't wander and requires significantly less drilling pressure compared to a conventional cone point drill.

A precision-sharpened four-facet point also reduces heat build-up, giving a very long service life for the drill bit. Independent tests show that drill bits sharpened using Tormek equipment last more than four times longer than new conventional drill bits¹.

¹ Uddeholm Tooling AB, 2010. In the test, 15 mm (0.59") deep holes were drilled in a hardened steel using a 6 mm (0.24") drill bit. At a speed of 1326 rpm and 0.15 mm (0.006") feed per revolution, the drill bits sharpened using the Tormek equipment lasted for 327 holes on average, while the new S-tip drill bits lasted for 72 holes.

Controlled sharpening

The risk of overheating and microcracking or loss of hardening of the steel is eliminated by working with the natural laws and cooling the edge continuously. You have full control at all times and can see how sharpening is progressing. A magnifying glass is included for smaller drill bits to help you line up the bit in the jig and see the results of your sharpening.

Specs

Weight: 3.35 kg (7.39 lb)
Color: Gray/black
Material: Precision-cast zinc, stainless steel, black composite
Warranty: 2-year warranty

Tormek Rotating Base (RB-180)

The RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds.

Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the Tormek Rotating Base RB-180, you can easily rotate the machine 180° to select the ideal sharpening direction.

The Rotating Base also makes it easy to switch from sharpening to honing. Honing is always carried out with the Honing Wheel running away from the edge, otherwise the tool will cut into the leather.

The RB-180 is constructed from three optimal high high performance materials to ensure a low friction and high stability. It automatically locks position.

A priority during the design process has been to make the RB-180 as thin as possible in order to not affect the working height. You easily turn the machine without any heavy lifting or water spilage.

The rubber feet absorb the normal vibrations and make sure that it rest firmly on the table. The RB-180 will fit the Tormek T-8, T-7, T-4, T-3, the 2000 and 1200 series, plus the SA-250 and N-1500.

View AllClose