TSO DoubleGroove™ 20mm Close Fit Bench Dogs - Tall Pair (61-410)

DoubleGroove™ Close Fit Tall Dogs
Innovative 20mm bench dogs ideal for positioning guide rails or jigs to your perforated worktop

This product is a special "Close Fit" version of our general purpose DoubleGroove™ Tall Dog. Most 20mm dogs on the market feature a 19.90mm body, which fits well in the Festool MFT/3 but can result in needless play when used with the Parf Guide System or a 20mm worktop made with precision by CNC router. Instead, our "Close Fit" or CF-Dogs feature a 19.98mm body providing a near zero clearance fit when inserted into a 20mm bench dog hole.

The usefulness of DoubleGroove™ CF-Dogs isn't limited to those using the Parf Guide System. Many woodworkers are creating custom 20mm tops with CNC routers capable of machining holes accurate down to ±0.002" (0.050mm). With this kind of accuracy, many discover that their traditional 20mm bench dogs now fit with unwanted play; a problem that can be solved with DoubleGroove™ CF-Dogs.

For more information on our CF-Dogs, read the DoubleGroove™ CF-Dogs Small product page. The remainder of this page is taken from our standard DoubleGroove™ Tall product page.

We've reinvented the modern 20mm bench dog and, in the process, addressed some common frustrations. Having dealt with our fair share of ill-fitting or "stuck" dogs, we've designed our dogs with twin grooves that run around the collar. While it may not seem like much, these double grooves make it much easier to remove the dog once it has been installed. Sharing the same careful attention to detail that has set our precision tools apart, small but important design elements—like the tiny undercut beneath the collar that guarantees a perfect 90 degree transition, even if the holes in your work surface aren't perfectly free of tearout, or slight chamfers along the touchable surfaces—result in a tool that's comfortable, accurate and a pleasure to use.

DoubleGroove™ Tall Dogs measure 70mm above the collar, and 18mm below the collar. This makes them the perfect size for positioning your guide rail, when used in combination with Dog Rail Clips. A unique design element—an easy-on taper at the top of each Tall Dog—simplifies the process of attaching your guide rail. (See the video below for a depiction of this process.) To accommodate clamping, an included M8x1.25 threaded hole at the bottom of each dog accepts our M8 SpeedKnobs™, FESTOOL® M8 knobs from the clamping elements kit, or any other similar off-the-shelf M8x1.25 threaded knob. All DoubleGroove Dogs are made in the USA from 6061-T6 aluminum on high-precision CNC machining centers and clear anodized for maximum durability. Sold in pairs.

The DoubleGroove™ Dog family includes four sizes: Small (ideal for most general use applications), Medium (for use with our PTR-18 Precision Triangle or thicker work surfaces), Large (for use with our MTR-18 Precision System Triangle), Tall (for using in conjunction with Dog Rail Clips to secure your guide rail to your worktop), and Stubby (also designed for use with Dog Rail Clips, but with a shorter height to clear your Festool track saw).

• Easier to Use: Twin grooves running around the collar make DoubleGroove Dogs easier to remove than other dogs on the market; no more stuck dogs!
• Optimized for Guide Rails: DoubleGroove™ Tall Dogs feature an easy-on taper designed into the top, which simplifies the process of connecting your guide rail to the worktop.
• A Perfect Fit: Precision machined to exacting tolerances, with a diameter of 19.9mm to strike the perfect balance between solid, secure mounting and ease of insertion/removal.
• Ideal for Custom Worktops: If you've made your own 20mm worktop based on the 20x96mm standard and aren't quite sure if your tolerances are perfect, you'll likely find DoubleGroove Dogs to be a better choice. Their twin collar grooves will make it easier to remove dogs that might become "too snug," and a swept undercut along the collar means DoubleGroove Dogs will mount flush even if your holes have tearout.
• Clampable: Each dog includes an M8x1.25 threaded hole, perfect for use with our SpeedKnobs to secure the dogs inside your 20mm worktop. (If you already have the knobs from Festool's 488030 Clamping Elements, those will work too, but you'll find our SpeedKnobs to be much faster and easier to thread.)

Optional Accessories

• TSO Products SpeedKnobs™
• Dog Rail Clips, for use in combination with DoubleGroove™ Tall Dogs to attach your guide rail to your worktop